Tag: benchwork

Benchwork, Layout Construction, Planning Book5 Comments

Build #12: Track-laying Begins

traiNmaster

In the rest of the world is today Father’s Day. Here in Germany, the Father’s Day is celebrated on 29th May each year, which is the ascension of Jesus to Heaven. I guess it is the Holy Father that we are celebrating then. Anyway, the German Father Day is a day where fathers (those of us who are on Earth) took out the beer cart and enjoy a full-day drinking. As for me, I continued working on my layout. It was time to lay some tracks. Sometime back, I bought a pack of 3mm cork wall tiles from Hornbach. For … Continue reading Build #12: Track-laying Begins

Layout Construction, Planning Book2 Comments

Build #11: Dive! Dive! Dive!

traiNmaster

It has been exactly two months since I did any serious work on my layout. Checking back on the Build #10, I stopped at one-half of the staging yard track arrangements. I am happy to reduce from 7 originally-planned tracks to 6. This time around, I went back to the standard modules Segment F-H. I disassembled all the 3 modules and took them to the front garden for further work. The nice thing about having a modular home layout is, you can remove them anytime and work at a more comfortable location. I avoided having saw dusts flying around the … Continue reading Build #11: Dive! Dive! Dive!

Benchwork, Layout Construction, Layout Planning, Planning BookLeave a comment

Build #06: Track Laying Visualisation

traiNmaster

We had good weather this weekend in Frankfurt. So it was worthwhile to go out and enjoyed the sun for one day. Strictly no construction. I was sure my neighbours enjoyed the peace and quiet Saturday that they did not have for 3 weekends. Despite no sawing and hammering, work still goes on in germaN160. In fact, it was back to the drawing board. I took out my track plans and examined the track arrangements and configurations at Segment A and its adjacent Segment H. I am now working on the bottom level aka Ground Minus 1, which is 110cm … Continue reading Build #06: Track Laying Visualisation

Benchwork, Layout Construction7 Comments

Build #05: Up, Up and Awake ……

traiNmaster

After 3 weekends and countless back pain, I am glad that all modules for Segment E to H and Segment A were finally completed and ready for assembly. I took them out to the garden to enjoy early spring sun. I am happy how the overall construction turned out. Turning the Idea into Reality This weekend I built support legs for standard modules. The end modules do not need any support legs (other than Segment E end module, which will have a cross bar for support (see pics below). As I mentioned in my previous post, I was concerned about the stability of … Continue reading Build #05: Up, Up and Awake ……

Benchwork, Layout ConstructionLeave a comment

Build #04: First Stress Test, I Meant the Module

traiNmaster

Yes, it was about time to do some stress tests on my module. After spending 2 weekends cutting and putting the parts together, I should test my module construction before I proceed. I do not want to repeat the same mistakes that I made during the last 2 weeks. So here are my self-evaluations. If you could also evaluate through the photos that I have uploaded and what I have described, all the better. I welcome your comments. Standard Module per Segment B-D, F-H (92cm x 30cm x 15cm) This is how the segments would look like when I join … Continue reading Build #04: First Stress Test, I Meant the Module

Benchwork, Layout Construction2 Comments

Build #03: Working 9 to 5 for germaN160

traiNmaster

Oh, what a truly exhausting day, body and fingers now aching. Today I spent 9am to 5pm working outdoor. I still have some energy left to blog about it so here are a few thoughts that I wanted to offload. I started my day at 9 with a visit to the wood mart. I got an extra sheet of 10mm 2.5 x 1.7m plywood. This second sheet has been cut into 8 pieces for me so I could focus on cutting them to smaller sizes later. I wanted to get extra sheet now so that I do not need to … Continue reading Build #03: Working 9 to 5 for germaN160

Benchwork, Layout Construction, Layout Planning, Planning Book3 Comments

Build #02: Lots of Measuring and Cutting for Module Parts

traiNmaster

This year’s weather was rather unusual. It was a relatively “warm” winter, between 5C and 12C, and occasional shower. The last 2 weekends were wet; thus, disrupting my plan to work outdoor. I do not have a proper workshop (note to self: make sure there is a small room for workshop when looking for new house) so I have to be satisfied with a makeshift workshop under 5C. In 3 hours, I managed to measure and saw module parts for Segment F, G and H and base for Segment A. This was my second time using Dremel DSM20, still more … Continue reading Build #02: Lots of Measuring and Cutting for Module Parts

Layout Construction2 Comments

Build #01: Plywood for Segment Modules

traiNmaster

Hello 2o14! It is time to start building. I spent the last quarter of 2013 building a diorama from actual plywood instead of carton cardboard and it was definitely good learning experience for a newbie. Most importantly for me is to be comfortable in handling the power tools (thanks Dremel for the DSM20 and Dremel 3000) and to work with woods. The next question would be why don’t I finish the diorama first before starting something – the idea of leaving something half done. As I mentioned before, the diorama is my test lab. The purpose was and is to learn as I … Continue reading Build #01: Plywood for Segment Modules

Benchwork, Layout Planning, Planning Book1 Comment

Tilt Table Layouts in Action

traiNmaster

It is good to know that there are people who have tilt table layouts. In Nscale.net and Nscale.org, the forumers referred me to their fellow members who have tilt-table layout – Gene (aka epumph in Nscale.net) and the late Suzan (aka steamedup in Nscale.org). With Gene’s permission and in loving memory of Suzan, who passed away sometime ago, I would like to share with you their construction of a tilt-table layout and how you could adopt them for yours. Gene (aka epumph) Gene from New Jersey, USA models a fictional Turtle Creek Industrial RR in N-scale on a 4ft 4in x 8ft 6in … Continue reading Tilt Table Layouts in Action

Benchwork, Layout Planning, Planning BookLeave a comment

Visualising My Layout – Peeling the Onion

traiNmaster

In my previous blog, I have showed how the prototype benchwork will look once it has been constructed. While waiting for comments and the quotation, I will explain how the layout will be built on top of the base frame. Remember that I am adopting and adapting Oliver Bachmeier’s Neustadt H0-scale layout in N-scale. Oliver’s original layout is 3.3m x 1.5m. My original intention was to scale that to 70%, to fit to the IKEA IVAR frames which when combined, will be 2.3m x 1.0m. If I follow truly to the scaling from HO- to N-scale, the same 3.3m x … Continue reading Visualising My Layout – Peeling the Onion