EducationLeave a comment

N#1: What is N-scale?

traiNmaster

Note to readers: N-scale has often been a misunderstood scale, either new comers not aware of its existence, ignorance or misinformation. Thus, I will write a series of articles on this scale in hope to educate and encourage more adopters. I consider myself a beginner to this hobby although I have done a lot of research, reading and learning and contributing in forums for last 10 years. Please share with others. If you would like to post in your blog, go ahead. If you want to me write about something, please email me. This is the first of a series of … Continue reading N#1: What is N-scale?

Benchwork, Layout Construction, Layout Planning, Planning BookLeave a comment

Improving Gradients

traiNmaster

I read in many forums as well as from various modular standards such as FREMO, Ntrak, etc., it was uncommon to have multi-levels. In fact, gradients were typically kept to minimal (please correct me if I erred). Ntrak did specify a “mountain division” track . On the other hand, segmented layout is actually a layout broken up into many equal or unequal sections without common end-profiles that allow for interchangeability. In essence, this is what my layout germaN160 is. I have in total 8 modules – 6 standard modules and 2 end modules. Each module supports 2 levels. My challenge … Continue reading Improving Gradients

Layout Construction, Layout Planning, Planning BookLeave a comment

Build #07: Flex Tracks as Planning Tool

traiNmaster

In my previous post – Build #06 Track Laying Visualisation – I started working on the track laying for 2 segments, or to be exact, marking the lines for the tracks. This might should overboard or too much planning but I liked the overall process of the hobby. The hobby is not just about collecting trains and running them in circles or whatever configurations. As I build my layout, I am also learning more about railway operations and how for example tracks were laid and why they were laid in certain ways. I do some research and talk to modellers … Continue reading Build #07: Flex Tracks as Planning Tool

Diorama Development, German RailwaysLeave a comment

First DCC Run on ICE Diorama

traiNmaster

I have not abandoned the ICE diorama at all. Yes, as I said before, the ICE diorama is a test bed for me to try out things before I put them on the larger segment layout. Finally, I took out my NCE PowerCab and gave it a trial run with Kato P42 Genesis #52. Sorry if you were expecting ICE on this run, despite the name of the diorama (note to self again: stop calling it ICE diorama). Anyway, #52 is the only loco that I have added a Digitrax decoder some 10 years back. I did some shopping at … Continue reading First DCC Run on ICE Diorama

German Railways, Layout Planning, Planning Book4 Comments

Best Practices for Model Platform Constructions

traiNmaster

The Federal Association of German Railway Friends (Bundesverband Deutscher Eisenbahn – Freunde e.V.) published best practices as guidelines for modellers of German railways. These best practices are not part of the the MOROP NEM standards; thus, modellers are not obligated to adopt them. Having said that, I read through their best practices and would adopt them on my layout. In particular, this best practice on platform and ramp constructions took into account the existing NEM 102 loading gauges/clearances. Additional clearances were recommended for platforms located at curves (NEM 103). Not all platforms are the same. Depending on its purposes and … Continue reading Best Practices for Model Platform Constructions

Benchwork, German Railways, Layout Construction, Layout Planning, Planning BookLeave a comment

Concept Development: S-Bahn Underground Station

traiNmaster

I am pretty satisfied with the results of the track laying visualisation. I made some adjustments to the track positions to ensure I have some buffer space between adjacent tracks. 4 of the 6 tracks would be elevated starting from the end of Segment A-H; thus, I made sure that I have some buffer when I saw them – I am using cookie cutter method, whereby you cut and lift a portion of the roadbed for elevation. One of the major adjustments was the tracks leading to the proposed S-Bahn underground station. This station could hold up to 3 coaches per track and with tighter than expected radius. … Continue reading Concept Development: S-Bahn Underground Station

Benchwork, Layout Construction, Layout Planning, Planning BookLeave a comment

Build #06: Track Laying Visualisation

traiNmaster

We had good weather this weekend in Frankfurt. So it was worthwhile to go out and enjoyed the sun for one day. Strictly no construction. I was sure my neighbours enjoyed the peace and quiet Saturday that they did not have for 3 weekends. Despite no sawing and hammering, work still goes on in germaN160. In fact, it was back to the drawing board. I took out my track plans and examined the track arrangements and configurations at Segment A and its adjacent Segment H. I am now working on the bottom level aka Ground Minus 1, which is 110cm … Continue reading Build #06: Track Laying Visualisation

DCC and Electrical System, Planning Book, Product ReviewLeave a comment

“The Cart Before The Horse” Syndrome

traiNmaster

I used to suffer occasional “the cart before the horse” syndrome. Really …. though lesser these days as I became older and wiser (?) hmm ……. Source: unknown I used to buy lots of rolling stocks and accessories such as tracks and turnouts but never had a chance to build a layout until now. I have a drawer full of rolling stocks waiting to roll. I am sure they would be rolling soon, at least in a few months time. What I wanted to talk about is the digital command control (DCC) system that I owned since 2005 – that’s … Continue reading “The Cart Before The Horse” Syndrome

Benchwork, Layout Construction7 Comments

Build #05: Up, Up and Awake ……

traiNmaster

After 3 weekends and countless back pain, I am glad that all modules for Segment E to H and Segment A were finally completed and ready for assembly. I took them out to the garden to enjoy early spring sun. I am happy how the overall construction turned out. Turning the Idea into Reality This weekend I built support legs for standard modules. The end modules do not need any support legs (other than Segment E end module, which will have a cross bar for support (see pics below). As I mentioned in my previous post, I was concerned about the stability of … Continue reading Build #05: Up, Up and Awake ……

Benchwork, Layout ConstructionLeave a comment

Build #04: First Stress Test, I Meant the Module

traiNmaster

Yes, it was about time to do some stress tests on my module. After spending 2 weekends cutting and putting the parts together, I should test my module construction before I proceed. I do not want to repeat the same mistakes that I made during the last 2 weeks. So here are my self-evaluations. If you could also evaluate through the photos that I have uploaded and what I have described, all the better. I welcome your comments. Standard Module per Segment B-D, F-H (92cm x 30cm x 15cm) This is how the segments would look like when I join … Continue reading Build #04: First Stress Test, I Meant the Module