Category: DCC and Electrical System

DCC and Electrical System, DCC-EX, Product ReviewLeave a comment

Review: World’s Smallest but Most Powerful All-in-One DCC/DC CommandStation

traiNmaster

Note: Reposted from my entry in germaN87AC blog The Hardware I think it is NOT preposterous to make the claim that the DCC-EX CommandStation/Booster 1 Express (EX-CSB1) is world’s smallest and most powerful all-in-one DCC/DC CommandStation/Booster. Its dimensions with the optional display case are L 73.6mm x W 70.7mm x H 19.5mm and weighs only 33 grams. After reading DCC-EX documentation, I was immediately convinced to get hold an EX-CSB1 to try out on my test track, module and eventually in-planning home layout. I owned Roco/Fleichmann z21 white CommandStation (it has since .been sold), a Märklin Central Station CS2 and … Continue reading Review: World’s Smallest but Most Powerful All-in-One DCC/DC CommandStation

DCC and Electrical System, Product ReviewLeave a comment

z21 Review: Booster Light and Detector

traiNmaster

It has been awhile (more than 1 year to be exact) since I touched my z21 digital controller. It lied packed neatly in the original packing. This means I have missed many firmware updates (hmm …. not a good thing to do). Anyway, even though I am not actively working on my layout, this does not mean that I have gave up the hobby. No, no way sir. You will just have to be a bit patient with my progress. This morning, I posted on a friend’s Facebook that I have 8 modules and if I work on one each … Continue reading z21 Review: Booster Light and Detector

DCC and Electrical System12 Comments

z21 Review: Settings and Programming

traiNmaster

Hello 2015! A good start for 2015 with my further review of the z21 controller. In my last post for 2014, I gave a quick run through of the setting up and running the trains. In this post, I would like to explain more about the Z21 settings and how to read and program decoder values. z21 Settings As mentioned in my last post, you need to change the default settings in z21 controller to suit your scale. The Output and Programming Voltages allow a value between 12V and 22V. The default settings are per the first photo. Track-Voltage settings … Continue reading z21 Review: Settings and Programming

DCC and Electrical System12 Comments

A Review of Surprised Birthday Gift – Fleischmann z21 Digitial Starterset ÖBB Rh1116 Taurus

traiNmaster

This is my 100th post on germaN160 thus far and so I would like to end the year by showing off my surprised birthday gift – a Fleischmann z21 Digital Startset with ÖBB (Austrian Federal Railway) Rh1116 Taurus and passenger coaches (Art. no. 931383) I wanted this set for quite some time. Guess, I was a good boy this year and thus, my Santa(rina) decided to reward me. If you have been following this blog, you would by now that I am modelling the German railways in Epoch 5/6. This era is marked by a few key characteristics, among other, … Continue reading A Review of Surprised Birthday Gift – Fleischmann z21 Digitial Starterset ÖBB Rh1116 Taurus

DCC and Electrical System, Layout Construction, Planning Book6 Comments

Build #16: Wiring and Weathering (Part 1)

traiNmaster

Last weekend I installed the track bus on all 3 modules (Segments F to H). This week, I added the feeders from the terminal points to the rails using AWG20 (0.5 sq.mm) wires. Each wire was connected to the respective points on the terminal strips. The DCC buzzer was helpful to detect any shorts while wiring. For such wiring, you would not normally make mistakes but as the layout gets larger and more tracks need to be wired, it is always good to have such buzzer. Thus, I started getting use to the habit of using DCC buzzer now. As … Continue reading Build #16: Wiring and Weathering (Part 1)

DCC and Electrical System, Layout Construction, Planning Book4 Comments

Build #15: Good Wiring is An Essential Lifeline to A Model Railway

traiNmaster

It was a nasty Saturday this weekend but it was a good time to spend indoor. I corresponded with Jason Reis about DCC wiring my modules some 3 months back and in between, I let the notes of our discussions set for awhile. A recap of those notes: The bottom level (pic below) will be divided into 5 small power districts. For circuit breakers, Jason recommended auto tail-light bulbs. Cheap and effective. The top level (pic below) will have 4 small power districts. I started with the bottom level wiring first: the track 2 (dark blue marking). I have read … Continue reading Build #15: Good Wiring is An Essential Lifeline to A Model Railway

DCC and Electrical System, Layout PlanningLeave a comment

Build #14: Turnouts Turned Out ….

traiNmaster

I am satisfied so far with the flex tracks that I have laid so far on Segments G, H and A as you can see in Build #12 and Build #13. Since then, I have spent about 10 minutes per day running my ICE 2 (Fleischmann) and ICE 3 (Arnold) models up and down the double tracks. The idea was to make sure that the track work does not cause any derailment. The track work was perfect. There was an “unintended” derailment, but not due to track work (see my Facebook report in germaN160 by traiNmaster on 25 June) Over … Continue reading Build #14: Turnouts Turned Out ….

Benchwork, DCC and Electrical System, Layout Construction, Planning BookLeave a comment

Build #13: Maiden Power Test Run on First 3 Km

traiNmaster

The first stretch 1.8m (or 3km in real-life) (each track) is ready although not ballasted. While waiting for the World Cup games to start, I spent some time cleaning the excess glues of the tracks and tested the pickup connection. At full throttle, it registered 17V (I am using Fleischmann analog DC transformer for tests) This time, Kato E8/9A volunteered to make the maiden trip, to and fro. I am happy with the result. It is a baby step but an important step for me. It is a sign that I am progressing rather than procrastinating. Continue reading Build #13: Maiden Power Test Run on First 3 Km

DCC and Electrical System, Layout Construction, Planning Book, Product ReviewLeave a comment

When No Sound is A Good Sign

traiNmaster

Wiring for a DCC layout will be top on my germaN160 layout construction program. Everywhere I read about DCC wiring, one of the essential tools to have is a audible short tester. How does this tester function? In short (sorry, pun intended here), the buzzer will be audible when you connect the feeders to the wrong track bus polarities. Model Railroad Hobbyist (MRH) magazine provides an excellent explanation and video on how this work and how to build one. Source: MRH March 2012 – Issue #25 So I bought my parts from Conrad for less than 10 Euro and soldered … Continue reading When No Sound is A Good Sign

DCC and Electrical System, Planning Book, Product ReviewLeave a comment

“The Cart Before The Horse” Syndrome

traiNmaster

I used to suffer occasional “the cart before the horse” syndrome. Really …. though lesser these days as I became older and wiser (?) hmm ……. Source: unknown I used to buy lots of rolling stocks and accessories such as tracks and turnouts but never had a chance to build a layout until now. I have a drawer full of rolling stocks waiting to roll. I am sure they would be rolling soon, at least in a few months time. What I wanted to talk about is the digital command control (DCC) system that I owned since 2005 – that’s … Continue reading “The Cart Before The Horse” Syndrome